Integra's runs at the Canadian nats

[Supertib]

here's some runs by Integra at the winter nationals...

http://www.deathbyspork.net/files/Tarkenchi/Integra's%20First%20qualifier.wmv

http://www.deathbyspork.net/files/Tarkenchi/Integra's%20first%20heat.wmv

the pink and yellow truggy is a RB modded 928.... watch what the STS does inthe straights.

http://www.deathbyspork.net/files/Tarkenchi/integra's%20second%20heat.wmv

[Supertib]

http://www.deathbyspork.net/files/Tarkenchi/integheatone.wmv

http://www.deathbyspork.net/files/Tarkenchi/integheattwo.wmv

http://www.deathbyspork.net/files/Tarkenchi/integraqualone.wmv

[Fx]

The last two videos are the only links that work.

BTW-Very nice racing, the camera man actually held the camera relatively still.

[Lunar Wolf]

Damn that servo going out sucked! What was it an Ace Servo?

[integra]

http://video.google.ca/videoplay?docid=88875327527753396&hl=en-CA

http://video.google.ca/videoplay?docid=4390335773638291088&hl=en-CA

http://video.google.ca/videoplay?docid=-4216174479472740173

http://video.google.ca/videoplay?docid=-6418445348199185379


Lunar...i blew a 5645...ace 1015...and 2 Futaba 9351's....twas a bad couple days for servos..:duh:

[k0m0d067]

when you cut and paste, you should REALLY do it in "edit" mode, as the actual listing truncates the links, and adds "..." in the middle to save space, while retaining the actual link when clicked...but when copied and pasted, it copies the "..."

so what were you running in the vids? the Carbon dream? and what class was it? sorry, I'm not a racer (yet) so sorry if the questions seem obvious...

[]-[0pa]0ng]

I was going to fix the links but like Komo said - it's just adds. Use the worls ICON when the box window appears back space the http:// paste your link it there click ok. Now you will seeyour link twice but the second one is in highlight BLUE back space the hihg light blue you will have this ][. in the middle of that type link name like for ex. ]Google race day[ then click submit. That's it.
Integra I see you have some shiny bulks. Who makes those? How did you get them so shiny.? What steps did you take to get them that way?

Thx

[Fx]

-[0pa]0ng;17508']
Integra I see you have some shiny bulks. Who makes those? How did you get them so shiny.? What steps did you take to get them that way?

Thx

Hop I found this from Integra's thread.

the cases and Bulks are GPM's to my knowledge....i got them second hand......and all i did was strip the anno with oven cleaner and take the peices to the Polishing wheel with Differnt Compounds from Corse to Fine...and when u get to the Fine all of a sudden its a MIRROR finish....Definatly not something to try with the Dremel...sooo not enuff Juice..and itll OverHeat it pretty quick...so a Bench top with something like a 6" wheel works great