What do i need for mech brakes ?

[xll-SavageX-llx]

Just wondering what i need for mech brakes, obviously a servo.
I used the HPI 100905 to convert my 2 speed trans to a single speed flux trans.

Thanks
- Brandon

[GRKSTL]

single speed flux trans? where? can you show me a link or picture?

[xll-SavageX-llx]

yeah single speed flux trans. I converted my spare 2 speed to save $40. use HPI 100905 to convert

http://i568.photobucket.com/albums/ss130/RiiFFY69/Savage%20Flux%20Build/IMG_3815.jpg

[TripleSix]

Think you just need the servo, all the parts for the actuall brakes, linkage, pads, brake hub. And you need a y harness for the esc and servo. And a castle link to shut off the brakes and revers on the esc, motor. Not sure if thats it, but close. Think frddy put mech brakes on his flux.

[xll-SavageX-llx]

Think you just need the servo, all the parts for the actuall brakes, linkage, pads, brake hub. And you need a y harness for the esc and servo. And a castle link to shut off the brakes and revers on the esc, motor. Not sure if thats it, but close. Think frddy put mech brakes on his flux.

yeah i got every thing except the Y harness.
bank and Fred did the mech brakes.

http://i83.photobucket.com/albums/j314/justin11275/BL%20stuff/DSC_0711.jpg