Starting prob

[ocremy]

after i start the engine, i give some gas.. and engine dies.
i have to restart the engine few more times and it dies again,
after few more times it seems to go fine... but some times if i let go the gas, my truck just keep pushing the gas. i think my truck gives gas by it self...wants to run away from me....is it the weather? i can't find the problem. And roto start part(back of the enigine) is loosen or it should be tighten with the engine?
Thank you,

Whos workin today? (President day)

[Jeremy]

Might be a little rich or lean for that matter set needles back to factory settings also might want to check your battires in the reciver (never know)

[k0m0d067]

also, make sure the return spring hasn't come off the carb slide...

[Jeremy]

also, make sure the return spring hasn't come off the carb slide...

Good thinking !!!!!!!!!

[ocremy]

hehe... whats the factory setting? 2 rounds?.. i got lost..
Thanks any wayz guys...

[k0m0d067]

which engine? diff engines have diff factory settings :D

[ocremy]

its savage 25 with stock engine.

[k0m0d067]

factory settings are:

HSN = 4 1/2 turns from closed

LSN = 3 turns from closed

Idle Screw should hold the slide open "About 2 mm"

[gzus11]

carb slide should be 1mm then adjust when you have the engine running.
should idle happily at low revs with no engagement of the clutch,
easiest to pick up the truck at idle ths wheels should not move and brakes disengaged.