"THE KiDDs" BulkHead Mod (PiCs)

[xll-SavageX-llx]

Hey guys this mod is for the stock plastic diff case.
Ok first of all as you can see on the diff case you have 2 holes 1 on each side for the TVP and you have a little nub above the hole well for some reason i didn't have a "nub" there was nothing for me :dunno: so what i have done is used a 11/64 bit and drilled the hole out and i had this old brake line from auto class at school so i tapped out the brake line to 4mm and then cut them into 1cm pieces and then pressed them into the holes in the diff case..

Picture Time =)

• Here is the brake line tapped out to 4mm ::
http://i568.photobucket.com/albums/ss130/RiiFFY69/Savage%20Build/IMG_1165.jpg

• Here is the hole with the brake line pressed in ::
http://i568.photobucket.com/albums/ss130/RiiFFY69/Savage%20Build/IMG_1170.jpg

• and as you can see you can have 2 capped head screws in there instead of one :)
http://i568.photobucket.com/albums/ss130/RiiFFY69/Savage%20Build/IMG_1171.jpg

and BTW it is ok if you drill all the way through (like i did) look in the picture below on the opposite side
(didn't think the macro was that good on my camera, man i need to clean up haha :duh: FACE PALM MY SELF !!) ::

http://i568.photobucket.com/albums/ss130/RiiFFY69/Savage%20Build/IMG_1167.jpg

So there you have it a nice easy to do mod (not sure how much it will help) but it looks COOL !

Thanks
- Brandon


tags: FLM Fast Lane Machine diff case mod tvps savage

[MikeK1981]

Good way to solve a problem. Great work man!

[Mickey]

nice little mod there brandon

[Os.savageboy]

looks good Brandon!

[NLMD]

Putting that one in the back of my brain for those stripped plastic holes. Thanks for posting.