29/9t bevel gear set

[fastlane01]

I bought 2 of these and was wondering what spur gear and pinion should I run? I have the x converted along with the single speed mod done. I rounded off the stock gears due to poor shimming and just wanted to beef up my diffs for heavy bashing. I currently run the 47/20 RRP gears. Was thinking of going 52/12 or 14. Thanks in advance.

[Pope]

The gearing of your cb and spur isn't going to need to change much as the gear ratio between the bp diffs and stock diffs aren't that diffrent.

Don't know what motor you are running but if you give us that we can be a little more helpfull.

I would say for a .28 you should be around a 18/47 and for a 30+ you should be around 20/48.

[fastlane01]

I am running a kershaw 7xl brushless motor with a cc mamba max pro esc

[Pope]

O no idea for the pinion and spur than. But you should not have to change what you have.

[frddyj]

i agree. run what you already had before changing the diffs & see if you like or dis-like.


&, as always, let us know what you find out.

[fastlane01]

Okay. I appreciate the help.