Platinumrcpoducts: B6 10Amp Charger (Lithium, NiCd, NiMH, PB)

[Larsenracing]

This charger will charge any battery you have for your R/C's and will balance your Lithium Battery's weather they're LiPo, LiFe, LiIo. It will charge up to 10A 200Watts and a max of 50000mAh so whatever you will need. This charger is Fan cooled to gain Max efficiency. This is a compact powerful charger and user friendly. This charger will also work with our Power Supply.

This charger sells for $70.00usd + Shipping.


Specifications:

Model Memory: 10 individual
Operating voltage range : 10.0 ~ 18.0 Volt
Circuit power: max. 200Watts (Charging)
max. 25 Watts (discharging)
Charge current range : 0.1 ~ 10.0A
Discharge current range : 0.1 ~ 5.0A
Current drain for balancing Lipo: 200mAh/cell
NiCd/NiMH battery cell count : 1 ~ 18 cells
Lithium battery cell count : 1 ~ 6 Series
Pb battery voltage : 2 to 24V
Weight : 960 g
Dimensions : 160 X 120 X 40 mm

Operating software

Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

- High-power and high-performance circuit

B610A employs the circuit that has maximum output power of 200Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.

- Individual voltage balancer for Lithium batteries inside

B610A has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

http://www.f-flying.com/image/Chargers/img2.gif

** When the 'Balance charge' mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger's charging lead should be connected to the output of battery pack.

And also, please pay attention to the polarity of the battery pack's output which goes to the charger's output. If it is reversed, the short-circuit can be happened on the battery pack.

- Accept various types of Lithium battery

B610A can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- Lithium battery 'Fast' and 'Storage' mode

You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

- Data store/load

For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging

Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- Back-light LCD screen

You can adjust the brightness of LCD display

- Robust outer aluminum case

High-quality aluminum case is durable and very efficient to cool out the internal heat

http://www.f-flying.com/image/Chargers/B610A-small.jpg

[Larsenracing]

This charger also includes a few adapters to get it going. These adapters include a 4mm Banana to JST Female, Banana to Futaba Female, Banana to Dean's male, Banana to Glow plug, and Banana to Alligator Clips.

It also includes a Temperature Sensor.

The charge lead is Male 4mm Banana on both Positive and Negative and are color coded.

[Crash]

nice Jayson

[Shaun]

i dont understand alot of the info given, lol but does sound very impressive indeed......

[Larsenracing]

They are very nice chargers. The largest thing is for people that don't understand everything is that this thing will put out 10Amps continuously and at 200Watts. That's quite a bit of power and that it will charge all of you Lithium battery's and NiCd, NiMH and PB.

It can charge a 10,000mAh 6s LiPo in an hour or a 5,000mAh 3s LiPo that can take 2C charge rates in 30 minuets (These numbers given are examples).

It will work with our PRCPS 480Watt 18Amp Power Supply which we sell at $57.00.

For those who want more power and a Dual charger check this one out: http://www.hpisavageforum.com/forums/showthread.php?t=12616

[frddyj]

10A for $70.00 is a good bang for your buck.

[ryugaiden05]

I think I may get one of these when I get my brushless short course truck. Great price!

[Larsenracing]

They are a great charger. Also check out our Dual charger which is great because you can charge 2 battery's at the same time. They are basically 2 completely separate chargers built into one which use the same model memory for pulling up your saved battery's. They are especially great for the trucks that run 2 Packs at the same time.

[Larsenracing]

Got some more of these in today as well. Can sell them at $65.00.

I guess I will have to get some picts looks like these died.