Savys Build

[Scott]

Well guys after months of saving funds my savy is getting ready to be reborn.
I started with this roller that I bought off of here a few months ago.http://i573.photobucket.com/albums/ss173/newbie1391/010-3.jpg
Here are some pics of the parts that I will be using for my build.
http://i573.photobucket.com/albums/ss173/newbie1391/076.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/077.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/078.jpg
Still waiting on some bulk cases,Lrp.28,and air filter.Hpoefully it will all be here by the end of the week. I wanna give a special thanks to frddy for helping answer all of the noob questions.And to Soulja55 and to HPISF for having the greatest forum..:resp:More pics to come....

[maximusraylius]

sweet ... get pics all put together ... nice start ....

[Combuster]

looks like it is going to be one wicked savage when it is done

[Larsenracing]

Looks to be a sick build. Please keep us posted. We love pictures.

[Bankrupter]

Sell the hubs as soon as they come off to recoup costs! Ill be waiting to see the final pics ..

[Scott]

Sell the hubs as soon as they come off to recoup costs! Ill be waiting to see the final pics ..

Already sold Bank,you closed this thread for me the other day..LOL...

[texasavage]

awsome! i need one of those 250cc tanks myself :). remember we love lots of pics!

[ohmygahitscoby]

Can't wait to see the build!

[soulja]

dang Scott.....don't know HOW i missed this!!

[Scott]

Here are some more pics of mill,rsc,and servo saver..
http://i573.photobucket.com/albums/ss173/newbie1391/076-2.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/077-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/078-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/079.jpg
More pics to come.Thanks for looking..

[ohmygahitscoby]

Nice engine. Nice RSC kit. Can't wait to see more.

[Scott]

Nice engine. Nice RSC kit. Can't wait to see more.

Thanks dude..

[frddyj]

whose bellcrank? GH?

[Scott]

whose bellcrank? GH?

Sorry should of spelled it out GH = Gloden Horrizons..

[ohmygahitscoby]

Sorry should of spelled it out GH = Gloden Horrizons..
Never heard of them, but I have heard of Golden Horizons. :dunno:
lol


Have you noticed a better turning radius with the RSC? Was thinking of getting the RSC kit but don't have the cash to buy one yet.

[Scott]

Here is a few more pics:
http://i573.photobucket.com/albums/ss173/newbie1391/080.jpg
I am using a hpi sf-5 for my steering servo with a racers edge servo horn.
Here is my 250cc tank and CF plate that I got from PRC.
http://i573.photobucket.com/albums/ss173/newbie1391/081.jpg
Thanks for looking..:peace:

[Bankrupter]

what in the world ? ? ? I see my truck! must go look to see if its still here...

LOL good stuff your going to love it! was that plate drilled for the servo mounts? I had larsons old one and had to drill it myself...

[Scott]

what in the world ? ? ? I see my truck! must go look to see if its still here...

LOL good stuff your going to love it! was that plate drilled for the servo mounts? I had larsons old one and had to drill it myself...

:lmao: The cf plate is sweet all predrilled for the mounts and ready to go..

[Mickey]

truck is looking good savy cant wait to see the finished product

[ohmygahitscoby]

Oh dang, just that servo arm looks better than my whole Savage! Can't wait for the rest of the build.

[Scott]

Here is a few more pics of my build..I moved the steering servo to the tvp.
http://i573.photobucket.com/albums/ss173/newbie1391/076-4.jpg
Here is a pic of the rush box:http://i573.photobucket.com/albums/ss173/newbie1391/077-3.jpgWaiting on the Hellfire mounts to mount BB's..
More pics to come :Xfingers:,thanks for looking..

[frddyj]

i like the angle of the link from servo arm to bell crank much better like that.

now your talkin LCG!!!

[Scott]

i like the angle of the link from servo arm to bell crank much better like that.

now your talkin LCG!!!

Thanks dude for showing me this..:jamout:

[Scott]

Here the lrp with robison vented flywheel,nova shoes..http://i573.photobucket.com/albums/ss173/newbie1391/077-4.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/076-6.jpg
More pics on the way...:peace:

[Scott]

Here is mill with vented bell all shimmed up and ready to go.. Like to say thanks to Bank for helping the noob out with this...:lmao:
http://i573.photobucket.com/albums/ss173/newbie1391/076-7.jpg

[Bankrupter]

If I had anything to do with it the carb would be on in the right direction for a savage. LOL Had to....

It took you what 10mins start to finish? I remember the same phone call with Visionary 45 mins later... and I still have to tune it! Your not a noob.

[frddyj]

If I had anything to do with it the carb would be on in the right direction for a savage. LOL Had to....

It took you what 10mins start to finish? I remember the same phone call with Visionary 45 mins later... and I still have to tune it! Your not a noob.

ummm, ya, thats pretty funny rite there

[Scott]

If I had anything to do with it the carb would be on in the right direction for a savage. LOL Had to....

It took you what 10mins start to finish? I remember the same phone call with Visionary 45 mins later... and I still have to tune it! Your not a noob.

:lmao: Yeah some where around that,is the counting me hanging up on you too?Sorry about the carb dude, just took it out of the box and started putting the flywheel,shoes,and bell on it.. Next pic of the mill it will be the right direction..rockout

[Londoner]

Looking great man, wish id got a CF servo plate now.

Can you get them Robinson vented flywheels in silver?

[Scott]

Thanks Londoner!!! Not real sure if the flywheel comes in silver or not,sorry bud..

[Londoner]

No worries, il have a look around and see if i can find one, i didnt know ya could get vented flywheels, seems like a good idea, looks as tho it scoops air as it spins and throws it into the shoe/bell area, quality!

[ohmygahitscoby]

I think you can just deanodize it to get it to a silver color.

[Scott]

Here is a couple pics of my mill,with nova mount and with the mesh set..Really like this mount,was a little P.I.T.A to set the mesh. After about 10mins I got it..:lmao:
:http://i573.photobucket.com/albums/ss173/newbie1391/077-6.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/076-8.jpg

Oh yeah and for Bankrupter I turned the carb the right way!!!
:highfive:

More to come!!:peace:

[frddyj]

imma watch A.M.W. & see if your mug is on there wanted for bank robbery.

trucks lookin the shiz scottob1

[Scott]

imma watch A.M.W. & see if your mug is on there wanted for bank robbery.

trucks lookin the shiz scottob1

:lmao: Man if that was true, I would probally just have Bank build it for me!!
money man

[Scott]

Here is couple more pics of my build, its starting to come together slowly..
http://i573.photobucket.com/albums/ss173/newbie1391/077-7.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/076-9.jpgThanks for looking...:peace:

[Scott]

Here is a pic with my ofna 086 pipe..Still waiting on the HF mounts so I can mount the BB's. Also thinking of away to mount the Mpi switch..My vacation has ended so will probally be the weekned before I get anohter chance to work on it..
http://i573.photobucket.com/albums/ss173/newbie1391/076-10.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/077-8.jpg
Thanks for looking..:peace:

[88gtanotchback]

wow thats a very nice build scott. very nice picks on all the parts. it banks truck with a touch of flm

[ohmygahitscoby]

Ooooo. Very nice man. Can't wait for the next update.

Did that PRC tank plate fit perfectly on the FLM's? I was interested in those.

[Scott]

wow thats a very nice build scott. very nice picks on all the parts. it banks truck with a touch of flm

Thanks dude...

[Scott]

Ooooo. Very nice man. Can't wait for the next update.


Did that PRC tank plate fit perfectly on the FLM's? I was interested in those.

Thanks coby, I will have some more pics REAL SOON!!!!!!!!

Yes it bolted right up with no major problems..( other than me being a noob,since this was my frist build..:lmao:) Very impressed with the plate, I would recomend it to anyone that was going to do the 250cc mod..

[Scott]

Well after doing some :thinking: I came up with away to mount the MPI switch..Took some scrap sheet metal and made me a mounting box.
http://i573.photobucket.com/albums/ss173/newbie1391/001-4.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/002-5.jpg
Then I dressed it up a little bit
http://i573.photobucket.com/albums/ss173/newbie1391/003.jpg
Here it is mounted to the rear tower...
http://i573.photobucket.com/albums/ss173/newbie1391/004.jpg
Thanks for looking, more pics on the way..:peace:

[Scott]

Here is a few pics of how I ran my electronics.The wrap is something I "borowed from work" pretty nice stuff for FREE!!!
http://i573.photobucket.com/albums/ss173/newbie1391/003-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/002-6.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/001-5.jpg


Thanks for looking!!More pics on the way!!:peace:

[frddyj]

did you use a few extensions? just keep an eye to see that you dont lose voltage to your servos (feel weak). sometimes a extension will do that.

[Scott]

did you use a few extensions? just keep an eye to see that you dont lose voltage to your servos (feel weak). sometimes a extension will do that.

Ok, thanks for lookin out for me frddy!!!:resp:

[maximusraylius]

nice job... you going to run a full skid plate so it dont grab the wires when running on rough debre?

[Scott]

nice job... you going to run a full skid plate so it dont grab the wires when running on rough debre?

Yeah Max,that will probally the last thing I put on since it is probally the easiest..:lmao:

[maximusraylius]

lol cool... was hopeing youd say that .. was thinking oooof them wires are going to get yanked off first 10 ft lol

[Scott]

lol cool... was hopeing youd say that .. was thinking oooof them wires are going to get yanked off first 10 ft lol

Actually they are not that bad once I put the TVP on that side!! Will post a pic of it so you can see...:rock:

[Scott]

Here are a few pics of diffrent views with the BB's,HF mounts,and shock caps.Also got the rpm box mounted..
http://i573.photobucket.com/albums/ss173/newbie1391/006.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/004-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/005.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/007.jpg
Almost there need to do the T/B linkage,put the wheels and tires on,and few more things..Also need to take a little more of the A- arms for the rsc to clear when truning..
Thanks for looking..:cheers:

[maximusraylius]

i see ... looks good .. nice job..

[Scott]

i see ... looks good .. nice job..

Thanks Max..

[BlackedOutSavy]

Nice build! Having the receiver outside the chassis scares me though. I don't think I would risk my $90 FASST receiver out there. I went with the IRC mid tank kit that includes a receiver box that fits under the tank.

[MikeK1981]

Nice build. Wow, I really gotta make more money, LOL! That's OK though I've only had mine a couple weeks so far but already have big plans. Good job on yours and good luck!

[frddyj]

imma steal your truck. nice build. it looks sweet. i like how you upgraded power & handling, very sensible upgrades and also sweet to look at.

Not to mention it gonna haul-the-mail. Any plans on havin' a certain Canadian Gent stroke it for you?

how much your LHS nail you for the shock caps?

[Scott]

Nice build. Wow, I really gotta make more money, LOL! That's OK though I've only had mine a couple weeks so far but already have big plans. Good job on yours and good luck!

Thanks Mike, I have been buying parts for this since March...

[Scott]

imma steal your truck. nice build. it looks sweet. i like how you upgraded power & handling, very sensible upgrades and also sweet to look at.

Not to mention it gonna haul-the-mail. Any plans on havin' a certain Canadian Gent stroke it for you?

how much your LHS nail you for the shock caps?

Thanks Frddy!! No plans on Robin to mod the motor... As for the shock caps I got them off of ebay for about 7.50 a pair..Also got the HF mount at the same store..:peace:

[Scott]

Well I finally got my T/B linkage done here is a couple pics:
http://i573.photobucket.com/albums/ss173/newbie1391/001-6.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/002-7.jpg

I also moved the MPI switch to the outside of the TVP's..I had it mounted to the rear shock tower.This elimanated the servo extension that I had to use.
Here is where i have it mounted now.
http://i573.photobucket.com/albums/ss173/newbie1391/003-2.jpg

Almost there still have to run the lines and a few other things..More pics to come..:peace:

[maximusraylius]

nice job .... clean..

[Scott]

nice job .... clean..

Thanks Max...Took me a minute to figure out why the throtle lingkage was way off...Then I noticed that the servo needed to be moved forward...Man what a newb I am..:lmao:

[maximusraylius]

lol i havent done that mod yet so ill use your noobiness to make sure i set the servo in the right spot lol....

[Scott]

Well I got my lines ran and the MotorSaver air filter on..
http://i573.photobucket.com/albums/ss173/newbie1391/004-2.jpg
Only things left to do is put the Maximizers and Zombies on and make sure everything is all tight...Just a few more pics and my build will be finished..
Thanks for looking!!!:peace:

[maximusraylius]

comeing out nice good job ...

[ohmygahitscoby]

Nice Savage man! I missed a few updates but I see it came together nicely. Can't wait to see a video on how it runs!

[Scott]

Nice Savage man! I missed a few updates but I see it came together nicely. Can't wait to see a video on how it runs!

Thanks Coby, still have a few thing left to do..Will try to get some vid as soon as I can find a video camera...:lmao:

[frddyj]

when is this savage scheduled to run exactly?

also, i wanna see a vid, you better not follow up this sweet build thread with a bash post saying "i wish i had a camera but the savy run like a beast......"

the world must see!

nice build btw.

bobang

[Badhabit75]

Very nice build Scott, nice clean look to it, im sure i will use some of your pic's for my build, i like the short run on the servo, that looks like it was a lil bit of a bear to set-up?

[maximusraylius]

when is this savage scheduled to run exactly?

also, i wanna see a vid, you better not follow up this sweet build thread with a bash post saying "i wish i had a camera but the savy run like a beast......"

the world must see!

nice build btw.

bobang

lol yes i agree cant wait to see it in action... but you see where he said he has to FIND the vid cam first?lol j.k scott ...just crackin on ya ... looks good . now get the tires on it and run the thing like you stole it lol

[Scott]

Very nice build Scott, nice clean look to it, im sure i will use some of your pic's for my build, i like the short run on the servo, that looks like it was a lil bit of a bear to set-up?

Thanks dude, it wasn't really that bad..Used this post to help me out..
http://www.hpisavageforum.com/forums/showthread.php?t=8612 post 9..

[ohmygahitscoby]

also, i wanna see a vid, you better not follow up this sweet build thread with a bash post saying "i wish i had a camera but the savy run like a beast......"

That was my build. :lmao:


Scott, for your linkages was the spring too long for the carb? OFNA gave me a really long one and when fully compressed, it didn't give enough space to engage brakes. Did you have to cut it or something?

[Scott]

when is this savage scheduled to run exactly?

also, i wanna see a vid, you better not follow up this sweet build thread with a bash post saying "i wish i had a camera but the savy run like a beast......"

the world must see!

nice build btw.

bobang

Well hopefully:Xfingers: i will break it in this comming weekend..I will have to make the 60 mile trip to the lhs to get me some byrons..I might be able to get my hands on a camera but are you going to be my camera man..:lmao:

[Scott]

nice job... you going to run a full skid plate so it dont grab the wires when running on rough debre?

Max this pic is just fro you.Had to man..:peace:
http://i573.photobucket.com/albums/ss173/newbie1391/004-3.jpg

[Scott]

:DJjam:Well guys here it is,the finished project..:DJjam:
http://i573.photobucket.com/albums/ss173/newbie1391/007-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/006-1.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/008.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/005-1.jpg
Have the bumpers amd towers comming in the mail..Should be here in the next couple of day..I would like to thank Bank and Frddy for all the there help and support..They pointed things out to me that helpped me out quite a bit.
Thanks to everyone else for there comments and for looking at my build..Next I will try and get some vids of it running...Thanks for looking!!:peace:

[maximusraylius]

Max this pic is just fro you.Had to man..:peace
http://i573.photobucket.com/albums/ss173/newbie1391/004-3.jpg


nice how heavy is that plate? im thinking of getting one for my build to..i have a integy one but dont like how it bolts to the sides of the tvp's ..

[Scott]

nice how heavy is that plate? im thinking of getting one for my build to..i have a integy one but dont like how it bolts to the sides of the tvp's ..

Max that is not heavy at all,pretty light...

[maximusraylius]

nice looks clean with it on to. so ill probly order it for mine but need bulks first lol. if i get flm bulks im thinking of getting the titanium arms but damn their pricey ..so probly stick with the rpm arms ..

[Badhabit75]

Nice to see it complete, but i got a ? for ya, the rear wheels look like they are toed in a lil bit? Is that rsc conversion kit, and was it hard to install? Ok so thats a couple of ?'s

Nice truck, nice thread.

[texasavage]

Savy's looking really good bud!

[BlackedOutSavy]

Nice looking Savage, but you need to do some tweaking on that rear camber and front toe!

[Scott]

Savy's looking really good bud!

Thanks dude....

[Scott]

Nice to see it complete, but i got a ? for ya, the rear wheels look like they are toed in a lil bit? Is that rsc conversion kit, and was it hard to install? Ok so thats a couple of ?'s

Nice truck, nice thread.

Thanks Bad... It wasn't that hard to install, just some minor mods to the bulk case and a arms..Other than that it was simple..haven't mess with the toe at all, just threw the wheels on and took some pics...That is my next project before I get her out and do the breakin...

[frddyj]

you did so much work on that truck, do you have a before pic?

your gonna love that mill/pipe combo. i cant remember if you upgrade all that

from stock hpi, but if you did, get ready for your face to hurt....from smiling.

[Scott]

Nice looking Savage, but you need to do some tweaking on that rear camber and front toe!

Thanks dude, I just threw the wheels on and took some pics...

[Scott]

you did so much work on that truck, do you have a before pic?

your gonna love that mill/pipe combo. i can remember if you upgrade all that

from stock hpi, but if you did, get ready for your face to hurt....from smiling.

This is waht I started with frddy..
.http://i573.photobucket.com/albums/ss173/newbie1391/010-3.jpg

Went from that to this....Badda Bing!!!!
http://i573.photobucket.com/albums/ss173/newbie1391/007-1.jpg

With alot of this money man :lmao:

[Fx]

It looks really nice Scott. Your going to get tons of run time with that tank. BTW you know your missing a bumper or two right?

[Scott]

It looks really nice Scott. Your going to get tons of run time with that tank. BTW you know your missing a bumper or two right?

:lmao: Yeah I no FX, should be here anyday..Thanks dude...:peace:

[Mattholew]

Damn, that is tight like nuts and bolts! Very nice!

[Scott]

Damn, that is tight like nuts and bolts! Very nice!

Thanks dude!!!

[]-[0pa]0ng]

Looks like you put quite a bit of thinking and money into this. Like bank says unload the hubs. Just trying to help you have the best setup. We've been there did it and regreted it. How much more time you think you think it will be before it's up and runnin?

[Scott]

-[0pa]0ng;126011']Looks like you put quite a bit of thinking and money into this. Like bank says unload the hubs. Just trying to help you have the best setup. We've been there did it and regreted it. How much more time you think you think it will be before it's up and runnin?

Thanks Op, I already unloaded the hubs.. Everything that I didn't use i sold to try abd get some funds back for other parts and pieces that i wanted..Will start breaking in the milll this weekend..(probllay Sunday..)

[Scott]

Well here is a few pics after i set up the toe and camber.. I am using the same set up that Frddy is using.
Front upper arm: Outer hole position .4835-in
Front tie rod: GH Bell crank mind you 1.4555
Rear upper arm: Inner position .6605

Here is a before pic:
http://i573.photobucket.com/albums/ss173/newbie1391/008-1.jpg
Here is after...
http://i573.photobucket.com/albums/ss173/newbie1391/002-9.jpg

Here is on e from the top before:
http://i573.photobucket.com/albums/ss173/newbie1391/005-1.jpg

After
http://i573.photobucket.com/albums/ss173/newbie1391/001-7.jpg

As you can see i also got my bumpers put on...

[Badhabit75]

When do we get to see this savvy in action, cmon go try to break something already~!! We need video already, jk man, nice looking truck.

[Scott]

Well after a few other issues with my savy i got it running today..Here is a short vid of it..
http://i573.photobucket.com/albums/ss173/newbie1391/th_084.jpg (http://s573.photobucket.com/albums/ss173/newbie1391/?action=view&current=084.flv)
Thanks for looking and will have more vids as i break her in..:peace:

[texasavage]

Cool! Thats what I was supposed to do with my Lrp this weekend, but I had to do some landscaping to pay off the $200 I spent on the savage last weekend :) Post as many vids as you can! Thanks man

[Scott]

Will do dude!! Probally be the weekend before i get out again..Work screwed up hours..:lmao:

[texasavage]

Lol.. Tell me about it. But if we didn't go then there would be no savy $ :(

[Scott]

Lol.. Tell me about it. But if we didn't go then there would be no savy $ :(

Very true..LOL

[88gtanotchback]

Cool! Thats what I was supposed to do with my Lrp this weekend, but I had to do some landscaping to pay off the $200 I spent on the savage last weekend :) Post as many vids as you can! Thanks man

what did you buy?:thinking: lol (on its way btw)

cool truck as always scott. truly an amazing build. each time i view it theres something new i love. cant wait for the action videos!

[Scott]

Thanks 88!! Hopefully i will have some this weekend...:peace:

[texasavage]

what did you buy?:thinking: lol (on its way btw)

Still have alot more to buy to catch up to you guys :)

[Bankrupter]

been waiting a while for this... cant wait to see you break it. O poop I meant run it!

[Scott]

been waiting a while for this... cant wait to see you break it. O poop I meant run it!

Yeah I have been waiting on this too Justin...Had A few issues come up with the build.But now with the help of fellow HPISF members I have gotten them straighend out..Hopefully if the weather is nice this weekend i can finish breaking it in..I am sure the I will do some damage to it sooner or later..:lmao: I have a buddy that just got done building a motocross track..Thats where i plan on going to bash at..I will make sure that I get some vids when I go there..:peace:

[what the FLUX]

Nice looking savvy you got there Scott. Got a ? for ya about your steering servo location. Why did you move it from under the plate to the tvp? Cheers.

[Scott]

Nice looking savvy you got there Scott. Got a ? for ya about your steering servo location. Why did you move it from under the plate to the tvp? Cheers.

It gave me a much better angle from the bell crank to the servo..

[what the FLUX]

OK, thanks. So is that easier on the servo or something?

[Scott]

OK, thanks. So is that easier on the servo or something?

Not real sure about that dude...Frddy advised to me to mount it to the tvps...Its just a straighter line to the servo there than it was when i had it monted to the cf plate..

[frddyj]

OK, thanks. So is that easier on the servo or something?

its all about lcg my man.

[Scott]

its all about lcg my man.

Thanks for chimming in on this frddy...:peace:

[what the FLUX]

Cool, thanks Scott & frddy.

[NITROMITE]

Scott how did i miss this great build?? You should have let me know!!
Nice build even if i missed it

[Hypnotiq]

Scott how did i miss this great build?? You should have let me know!!
Nice build even if i missed it

No joke.. hell of a build right there... Lets see some video!!

[Scott]

No joke.. hell of a build right there... Lets see some video!!

Thanks Hyp!!!! Will have vids when the weather breaks...

[Scott]

Picked up some HellFire shafts for my BB's..Here is a pick of the shafts
http://i573.photobucket.com/albums/ss173/newbie1391/011-3.jpg

Here is a before pic without the shafts:
http://i573.photobucket.com/albums/ss173/newbie1391/002-9.jpg

After:
http://i573.photobucket.com/albums/ss173/newbie1391/012-2.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/015.jpg

Side view
http://i573.photobucket.com/albums/ss173/newbie1391/013.jpg

:peace:

[88gtanotchback]

looks awesome Scott. loving the stance!

[Hypnotiq]

yes.. thats what im looking for.. good thing you posted the part number. Looks perfect scott.. bash on!

[Scott]

looks awesome Scott. loving the stance!

Thanks Scott ( :lmao: ) I love the stance of it too..Can't belive how much of a diffrence they made..

[Scott]

yes.. thats what im looking for.. good thing you posted the part number. Looks perfect scott.. bash on!

Thanks Jr!!!

[Hypnotiq]

Thanks Jr!!!

Np man.. looks sweet.. you will love the way it handles.. turns / steering.. so sick.. sway bars next?

[MikeK1981]

Looks good man!

[Scott]

Np man.. looks sweet.. you will love the way it handles.. turns / steering.. so sick.. sway bars next?

Been thinking about sway bars, haven't made up my mind yet..:dunno:

[frddyj]

i got a set of these cheap. the shafts, plungers, & shock eyes all work on the big bores.

shafts are same length & dia as hellfire shafts. http://cgi.ebay.com/CEN-Genesis-Nemesis-GST-7-7-Shocks-Set-of-4_W0QQitemZ330391143583QQcmdZViewItemQQptZRadio_Co ntrol_Vehicles?hash=item4cecd8c49f

[NITROMITE]

that thing is looking sick man keep up the good work!

[Shaun]

awsome build!!now i know why you selling the zombies to me lmao

[xll-SavageX-llx]

Picked up some HellFire shafts for my BB's..Here is a pick of the shafts
http://i573.photobucket.com/albums/ss173/newbie1391/011-3.jpg

Here is a before pic without the shafts:
http://i573.photobucket.com/albums/ss173/newbie1391/002-9.jpg

After:
http://i573.photobucket.com/albums/ss173/newbie1391/012-2.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/015.jpg

Side view
http://i573.photobucket.com/albums/ss173/newbie1391/013.jpg

:peace:

What's the P/N for those shafts ?
The pics a little blurry ..

[ljrce]

hpi86541 is for those hellfire shock shafts

[Bankrupter]

Scott any updates ?

[frddyj]

pow!!!!!!!!!!

[Scott]

UPDATE TIME!! I finally installed the Ace ds1015 and ds1313 also got the linkage done up..Thank frddy for the pics..:resp:

http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/125.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/126.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/128.jpg

Got the 3pmx radio..
http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/131.jpg

Also installed the HPI sway bars
http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/124.jpg
http://i573.photobucket.com/albums/ss173/newbie1391/Savys%20build/123.jpg

Stay tuned more pic to come.. :rock1:

[Bankrupter]

looks like bash time!!!

[Scott]

Also added the PRC wing mount along with Proline wing
http://www.hpisavageforum.com/gallery/data/500/138.jpg
http://www.hpisavageforum.com/gallery/data/500/137.jpg

I also got some dishy's with proline bowties..
http://www.hpisavageforum.com/gallery/data/500/139.jpg

Here is some outside shots
http://www.hpisavageforum.com/gallery/data/500/134.jpg
http://www.hpisavageforum.com/gallery/data/500/136.jpg
http://www.hpisavageforum.com/gallery/data/500/135.jpg

[88gtanotchback]

looking very nice! time to rip!

[xll-SavageX-llx]

Very nice Scott do you know the P/N for that proline wing ??

[]-[0pa]0ng]

Nice truck - clean pics good stance. I have the same wing

[Scott]

Very nice Scott do you know the P/N for that proline wing ??

Thanks brandon!! Here is a link for the wing..
https://www.myatomic.com/catalog/viewsku?sku=PRO602303&q=PRO602303

looking very nice! time to rip!

Thanks 88

-[0pa]0ng;173247']Nice truck - clean pics good stance. I have the same wing

Thanks Brian

[NITROMITE]

look sick!!!
nice job!!!!!

[Os.savageboy]

Looks awesome!

[Scott]

look sick!!!
nice job!!!!!

Looks awesome!

Thanks fellas!!

[tinker2141]

Get it DIRTY

[kvnnets]

That's an awsome looking truck. Great job.

[Scott]

That's an awsome looking truck. Great job.

Thanks Kevin.. I got a ? for ya? How is the CF build of your going? You have any updates?

[kvnnets]

Thanks Kevin.. I got a ? for ya? How is the CF build of your going? You have any updates?

It's at a stand still right now. Selling a couple of things so that I can raise some money to finish. As soon as I start building it again I will be updating my thread.

[JoeGuam]

Hot Stuff! I just purchased the DS 1313 as well. I fried my HF5 Bashing a few days ago. Luckly i had an extra servo.