Maximizer Beadlocks and X4.6 Stock Tires

[seatpants]

Does anyone know if this setup will work? Not sure if the tire will stretch over the wheel.
Maximizer Beadlock http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNWR1&P=ML


Stock X4.6 Tire http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMCZ5&P=7

Thanks

[HPI_Savage25]

Yes those will work together. You will love those wheels also if you get them!!!

[ohmygahitscoby]

They will work. The Maximizer website doesn't state that they will need ring shims, but they give you the rings anyways just in case.

[frddyj]

Does anyone know if this setup will work? Not sure if the tire will stretch over the wheel.
Maximizer Beadlock http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNWR1&P=ML


Stock X4.6 Tire http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMCZ5&P=7

Thanks

they'll work, but you should consider better tires, those dont give much (if any) stability.

the dont 'stretch over' the rim is in 2 pcs & you fasten with screws

[johnnypoopoopants]

Yeah, the stock tires tend to be rather bouncy and roll a lot for my taste. I would go with something from pro-line with. I run bow ties on mine and they are very stable. I think i wanna try some badlands though, the badlands / maximizer combo looks sikk!!!!!

[ohmygahitscoby]

I also run Bowties and they run very well. I also want to try either Badlands or Zombie Max tires.

[n2opony92]

I like those same wheels, that's next on my mod list.

[wildchild27]

ya ill have to agree my next mod will be beadlock rims

[Core]

not trying to hijack but..

maximizers with zombies. i'm really happy with the way the combination looks. the zombies were pretty soft so i belted them with gorilla tape. i'm thinkin' i might switch to stainless screws on the maximizers for no other reason than i think it would really define the wheel better

http://i44.tinypic.com/1zytrvd.jpg

http://i39.tinypic.com/idyu4y.jpg

i just put these on tonight along with the wing/mount/stay from larsen. larsen's wing mounts rock. :rock:

[Fx]

not trying to hijack but..

maximizers with zombies. i'm really happy with the way the combination looks. the zombies were pretty soft so i belted them with gorilla tape. i'm thinkin' i might switch to stainless screws on the maximizers for no other reason than i think it would really define the wheel better

http://i44.tinypic.com/1zytrvd.jpg

http://i39.tinypic.com/idyu4y.jpg

i just put these on tonight along with the wing/mount/stay from larsen. larsen's wing mounts rock. :rock:
I run the wheel tire setup. I an probably going to try pro-line badlands next. To answer your question, yes they fit just fine.